Cisco SPA 501G Administration Guide

Getting Started
Upgrading Firmware
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 9
1
Cisco SPA 502G, Cisco SPA 504G, Cisco SPA 508G, Cisco SPA 509G:
STEP 1 Press the Setup button.
STEP 2 Scroll to Network and press Select. The IP Address is displayed under Current IP.
Cisco SPA 525G:
STEP 1 Press the Setup button.
STEP 2 Scroll to Status and press Select.
STEP 3 Scroll to Network Status and press Select. The IP address of your phone is
displayed.
WIP310:
STEP 1 In the Home screen, press the Select key and navigate to Settings .
STEP 2 Press the Select key and navigate to Phone Info.
STEP 3 The IP Address section displays the IP address.
Downloading the Firmware
NOTE Requires a Cisco.com user ID and password.
STEP 1 Direct your browser to the following URL: http://www.cisco.com/public/sw-
center/index.shtml.
STEP 2 Search to locate your product.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English