Cisco SPA 501G Administration Guide

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Features
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 65
3
• Try a value that is loud enough without producing echo (an issue if the input
gain is too high).
STEP 5 Click Submit All Changes.
Enabling Wireless (Cisco SPA 525G only)
The Cisco SPA 525G provides a built-in Wireless-G interface. To enable wireless:
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the System tab.
STEP 4 Under Wi-Fi Settings, in the SPA525-wifi-on field, choose yes.
STEP 5 Click Submit All Changes.
Enabling Bluetooth (Cisco SPA 525G only)
The Cisco SPA 525G supports Bluetooth to allow use of the phone with a wireless
Bluetooth-enabled headset. To enable Bluetooth:
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the System tab.
STEP 4 Under Bluetooth Settings, in the Enable BT field, choose yes.
STEP 5 Click Submit All Changes.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English