Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
System Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 205
B
PPPoE Settings
Optional Network Configuration
LAN MTU LAN Maximum Transmission Unit size. Default value:
1500.
Ethernet MTU (SPCP) Ethernet Maximum Transmission Unit size. Default
value: 1500.
Duplex Mode Duplex Mode—Choose one of the following to
configure the speed/duplex for the phone’s Ethernet
ports:
• Auto
• 10MBps/Duplex
• 10MBps/Half
• 100Mbps/Duplex
• 100MBps/Half
Parameter Description
Parameter Description
PPPoE Login Name Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
PPPoE Login Password Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
PPPoE Service Name Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Parameter Description
Host Name The host name of the IP phone.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English