Cisco SPA 501G Administration Guide

Customizing Cisco SPA and Wireless IP Phones
Enabling Call Features
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 42
3
• Key System IP Address—IP address of the call control server IP. Enter the IP
address for teleworkers or other scenarios where multicast does not work.
• Force LAN Codec—Used with the Cisco SPA 9000. Choices are none,
G.711u, or G.711a. Defaults to none.
STEP 5 Click Submit All Changes.
Enabling Call Features
This section describes how to enable and disable call features on the phone.
Enabling Anonymous Call and Caller ID Blocking
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under Supplementary Services, under the type of call blocking to enable, choose
yes.
• Block ANC—Blocks anonymous calls.
• Block CID—Blocks outbound caller ID.
NOTE These features can also be configured from the User tab, under Supplementary
Services.
STEP 5 Click Submit All Changes.

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English