Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
User Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 280
B
Text Logo Text logo to display when the phone boots up. A service
provider, for example, can enter logo text as follows:
• Up to 2 lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) between lines
• Insert escape code %0a
For example, “Super\n%0aTelecom” will display:
Super
Telecom
For more information, see the “Configuring Phone
Information and Display Settings” section on page 33.
BMP Picture Download
URL
URL locating the bitmap (.BMP) or .jpg file to display on the
LCD background.
For more information, see the “Configuring Phone
Information and Display Settings” section on page 33
.
Logo Type Select from Default, Download BMP Picture, or Text Logo.
Defaults to Default.
For more information, see the “Configuring Phone
Information and Display Settings” section on page 33
.
Background Picture
Type
Select from Default, Download BMP Picture, or None.
Defaults to Default.
For more information, see the “Configuring Phone
Information and Display Settings” section on page 33.
LCD Contrast Enter a number value from 1 to 30. The higher the number,
the greater the contrast on the screen.
Back Light Enable Select yes to enable the screen back light.
Back Light Timer (sec) Enter the number of seconds before the back light should
turn off.
Parameter Description

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English