Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 249
B
Remote Progressing LED LED pattern during the Remote Progressing state,
where another station is attempting on this shared call
appearance an outbound call that is progressing. Not
applicable if the call appearance is not shared. Leaving
this entry blank indicates the default value of c=r;p=d.
Local Ringing LED LED pattern during the Local Ringing state, when the
call appearance is ringing. Leaving this entry blank
indicates the default value of c=r;p=f.
Remote Ringing LED LED pattern during the Remote Ringing state, where
the shared call appearance is in ringing on another
station. Not applicable if the call appearance is not
shared. Leaving this entry blank indicates the default
value of c=r;p=d.
Local Active LED LED pattern during the Local Active state, where the
call appearance is engaged in an active call. Leaving
this entry blank indicates the default value of c=r.
Remote Active LED LED pattern during the Remote Active state, where
another station is engaged in an active call on this
shared call appearance. Not applicable is this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=d.
Local Held LED LED pattern during the Local Held state, where the call
appearance is held by this station. Leaving this entry
blank indicates the default value of c=r;p=s.
Remote Held LED LED pattern during the Remote Held state, where
another station has placed this call appearance on
hold. Not applicable if the call appearance is not
shared. Leaving this entry blank indicates the default
value of c=4,p=s.
Register Failed LED LED pattern when the corresponding extension has
failed to register with the proxy server. Leaving this
entry blank indicates the default value of c=a.
Disabled LED LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving
this entry blank indicates the default value of c=o.
Registering LED LED Pattern when the corresponding extension is
trying to register with the proxy server. Leaving this
entry blank indicates the default value of c=r;p=s.
Parameter Description

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English