Cisco SPA 500 Series and Wireless IP Phone Field Reference
Regional Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 238
B
Set Local Time (HH/mm) Sets the local time (hh represents hours and mm
represents minutes). Seconds are optional.
NOTE Not applicable to the Cisco SPA 525G.
Time Zone Selects the number of hours to add to GMT to generate
the local time for caller ID generation. Choices are
GMT-12:00, GMT-11:00,…, GMT, GMT+01:00,
GMT+02:00, …, GMT+13:00.
Defaults to GMT-08:00.
NOTE Found in the Time section for the Cisco SPA
525G.
Time Offset (HH/mm) This specifies the offset from GMT to use for the local
system time.
NOTE Found in the Time section for the Cisco SPA
525G.
Parameter Description