Cisco SPA 501G Administration Guide

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 244
B
Text Logo Text logo to display when the phone boots up. A
service provider, for example, can enter logo text as
follows:
• Up to 2 lines of text
• Each line must be fewer than 32 characters
• Insert a new line character (\n) between lines
• Insert escape code %0a
For example, “Super\n%0aTelecom” will display:
Super
Telecom
NOTE Not applicable to the WIP310. On the Cisco
SPA 525G, this setting is located in the User tab. See
Screen (Cisco SPA 525G), page 279.
BMP Picture Download URL URL locating the bitmap (.BMP) file to display on the
LCD background.
For more information, see the “Configuring Phone
Information and Display Settings” section on
page 33
.
NOTE Not applicable to the WIP310. On the Cisco
SPA 525G, this setting is located in the User tab. See
Screen (Cisco SPA 525G), page 279.
Select Logo Select from Default, BMP Picture, Text Logo, or None.
Defaults to Default.
NOTE Not applicable to the WIP310. On the Cisco
SPA 525G, this setting is located in the User tab. See
Screen (Cisco SPA 525G), page 279.
Select Background Picture Select from Default, BMP Picture, or None.
Defaults to Default.
NOTE Not applicable to the WIP310. On the Cisco
SPA 525G, this setting is located in the User tab. See
Screen (Cisco SPA 525G), page 279.
Softkey Labels Font Choose the font width for the softkey labels to display
on your phone. See Customizing Phone Softkeys,
page 51.
Parameter Description

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English