Cisco SPA 501G

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Ext Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 274
B
G729a Enable To enable the use of the G.729a codec at 8 kbps,
select yes. Otherwise, select no.
Defaults to yes.
G722 Enable Enables use of the G.722 codec. Defaults to yes.
NOTE Not applicable to the WIP310.
G723 Enable To enable the use of the G.723a codec at 6.3 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE G.723.1 is not supported on the Cisco SPA
525G or WIP310.
G726-16 Enable To enable the use of the G.726 codec at 16 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not supported on the Cisco SPA 525G.
G726-24 Enable To enable the use of the G.726 codec at 24 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not supported on the Cisco SPA 525G or
WIP310.
L16 Enable To enable the use of the L16 codec, select yes.
Otherwise, select no.
Defaults to yes.
NOTE Cisco SPA 525G only.
G726-32 Enable To enable the use of the G.726 codec at 32 kbps,
select yes. Otherwise, select no.
Defaults to yes.
G726-40 Enable To enable the use of the G.726 codec at 40 kbps,
select yes. Otherwise, select no.
Defaults to yes.
NOTE Not applicable to the Cisco SPA 525G.
Parameter Description