Cisco SPA 501G Administration Guide

Getting Started
Using IVR on the Cisco SPA 501G IP Phone
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 19
1
181 Set the IP multicast address (used by the Cisco SPA 9000 to
communicate with the IP phone). Enter the address (use * to enter the “.”
value), then press #.
To s a v e , p r e s s 1. To review the value you entered, press 2. To re-enter,
press 3. To exit, press *.
7932 Enable or disable the web server. Press 1 to enable or 0 to disable, then
press #.
To s a v e , p r e s s 1; to review, press 2; to re-enter, press 3; to exit, press *.
723646 Enable or disables access to the administrative (admin) login on the web
interface. Press 1 to enable or 0 to disable, then press #.
To s a v e , p r e s s 1; to review, press 2; to re-enter, press 3; to exit, press *.
Number Option

Cisco SPA 501G Specifications

General

Brand	Cisco
Model	SPA 501G
Category	IP Phone
Language	English