Cisco SPA 501G

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 39
3
STEP 6 In the Screen Saver Icon field, choose the display type:
• A background picture.
• The station time in the middle of the screen.
• A moving padlock icon. When the phone is locked, the status line displays a
scrolling message “Press any key to unlock your phone.”
• A moving phone icon.
• The station date and time in the middle of the screen.
• A blank “power save” screen.”
STEP 7 Click Submit All Changes.
Cisco SPA 525G:
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the User tab.
STEP 4 Under Screen, in the Screen Saver Enable field, choose yes.
STEP 5 In the Screen Saver Type field, choose the display type:
• Black Background—Displays a black screen.
• Gray Background—Displays a gray screen.
• Black/Gray Rotation—The screen incrementally cycles from black to gray.
• Picture Rotation—The screen rotates through available pictures on the
phone.
• Digital Frame—Shows the background picture.
STEP 6 In the Screen Saver Trigger Time field, enter the number of seconds that the phone
remains idle before the screen saver turns on.
STEP 7 In the Screen Saver Refresh Time field, enter the number of seconds before the
screen saver should refresh (if, for example, you chose a rotation of pictures).
STEP 8 Click Submit All Changes.