Cisco SPA942 - Cisco - IP Phone

Customizing Cisco SPA and Wireless IP Phones
Configuring Lightweight Directory Access Protocol (LDAP)
Cisco SPA and Wireless IP Phone Administration Guide 79
4
LDAP Client DN Enter the distinguished name domain components
[dc] ; for example:
dc=cv2bu,dc=com
If using the default Active Directory schema
(Name(cn)->Users->Domain), an example of the
client DN follows:
cn="David Lee",dc=users,dc=cv2bu,dc=com
LDAP Username Enter the username for a credentialed user on the
LDAP server.
LDAP Password Enter the password for the LDAP username.
LDAP Search Base Specify a starting point in the directory tree from
which to search.
Separate domain components [dc] with a comma.
For example:
dc=cv2bu,dc=com
LDAP Last Name Filter This defines the search for surnames [sn], known as
last name in some parts of the world. For example,
sn:(sn=*$VALUE*). This search allows the provided
text to appear anywhere in a name, beginning,
middle, or end.
LDAP First Name Filter This defines the search for the common name [cn].
For example, cn:(cn=*$VALUE*). This search allows
the provided text to appear anywhere in a name,
beginning, middle, or end.
LDAP Search Item 3 Additional customized search item. Can be blank if
not needed.
LDAP Item 3 Filter Customized filter for the searched item. Can be
blank if not needed.
LDAP Search Item 4 Additional customized search item. Can be blank if
not needed.
LDAP Item 4 Filter Customized filter for the searched item. Can be
blank if not needed.
Parameter Description