Cisco SPA942 - Cisco - IP Phone User Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Lightweight Directory Access Protocol (LDAP)
80 Cisco SPA and Wireless IP Phone Administration Guide
4
The following graphic is an example of an LDAP configuration:
For more information on LDAP, including troubleshooting information, see the
Configuring LDAP Directory Search on SPA SIP IP Phones Application Note,
available from http://www.cisco.com/web/partners/sell/smb/products/
voice_and_conferencing.html#~vc_technical_resources
(partner log on required).
LDAP Display Attrs Format of LDAP results display on phone where:
• a—Attribute name
• cn—Common name
• sn—Surname (last name)
• telephoneNumber—phone number
• n—Display name
• t—type
• p—phone number
LDAP Number Mapping
Can be blank if not needed.
NOTE With the LDAP number mapping you can
manipulate the number that was retrieved from the
LDAP server. For example, you can append 9 to the
number if your dial plan requires a user to enter 9
before dialing. If you do not manipulate the number in
this fashion, a user can use the Edit Dial feature to
edit the number before dialing out.
Parameter Description

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English