95
© Tieline Research Pty. Ltd. 2021
Gateway and Gateway 4 Manual v1.2
Disconnect a Loaded Program
1. Click the Disconnect button in the Quick Connect panel.
2. Click Yes in the confirmation dialog to disconnect the connection.
Dial Peer-to-Peer over IP with Quick Connect
Important Notes:
· Click the Unload button in the Program Loader panel if a program is currently
loaded.
· The transcriptor algorithm is for closed captioning and not normal broadcast
configurations.
1. Click the drop-down Transport menu arrow in the Quick Connect panel and select IP.
2. Click the drop-down Algorithm menu and select an algorithm.
To Next Page
Loading...
