8
-
46
DK4220/4520/4720/5020/5320/5520/6020
T11O755A
T11O756A
TE1O740A
1. Turn the key switch to the "OFF"
position and unscrew the screw from
the mounting hole with a cross-head
screwdriver to separate the front
glass case.
(1) Work Lamp Glass Case
2. Unscrew the ground wire screw,
disconnect the connector, and turn
the bulb counterclockwise to remove
it. Then, install a new bulb with the
same capacity.
(1) Work Lamp Bulb
(1) Room Lamp
1. Fit a at-bladed screwdriver into the
edge of the room lamp and pry o
the room lamp cover.
ROOM LAMP
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 46OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 46 2023-09-22 오전 11:36:192023-09-22 오전 11:36:19
To Next Page
Loading...
