Daedong DSF75GT - Loading and unloading to and from transporting vehicle

6
-
11
DRIVING COMBINE HARVESTERDSF75
GT
6
-
10
6
-
11
DRIVING COMBINE HARVESTERDSF75
GT
6
-
10
LOADING AND UNLOADING TO AND FROM TRANSPORT-
ING VEHICLE
(A) 4 times long as height of cargo bed of
transporting vehicle
(B) Cargo bed height
Use ramps that are strong
(enough to withstand the weight
of the combine harvester), wide
(1.2 times long as the tire width)
and long (4 times long as the
height of the cargo bed of the
vehicle) enough with an anti-
skid surface.
Hooks at the end of ramps
should be set rmly to the cargo
bed and there should be no gap
or step between the ramps and
cargo bed.
Do not move the power steering
l
ever left or right on ramps. The
vehicle may fall off the ramps.
If it is needed to turn the com-
bine harvester, turn it only on the
ground or deck, not on ramps.
Do not allow anyone to come
near the combine harvester for
everyone's safety.
•
•
•
•
•
CAUTION
A
B
cf1O616a
cf1O045a
Never depress the parking
brake pedal during driving or
loading or unloading it to or
from a truck. If depressed, the
vehicle body may be pulled to
one side. If the vehicle needs
to be stopped immediately,
place the main shift lever in
the OFF position.
When parking on a slope,
choke the crawlers to prevent
the vehicle from rolling down
the road.
•
•
CAUTION
CF100(DSF75GT)_콤바인_영문판_06.indd 10 2017-07-03 오후 2:27:11