Daedong DSF75GT - Changing Transmission Case Fluid

8
-
49
MAINTENANCED
SF75GT
8
-
48
8
-
49
MAINTENANCED
SF75GT
8
-
48
Remove the drain plug from the bot-
tom of the transmission case to drain
used uid. After draining uid, tighten
the drain plug rmly. Then, add uid
through the ller hole.
If oil flows out from the level check
hole, the oil level is proper. Tighten
the inspection bolt (M8).
(1) Oil Filler Hole (2) Level Check Bolt
(3) Drain Plug
CHANGING TRANSMISSION
CASE FLUID
(1) Oil Filler Hole (2) Oil Gauge
(A) Oil Level Is Acceptable Within This Range
Tighten the drain plug, add fluid to
the specied level and tighten the oil
ller plug rmly.
FILLING
22
111
AA
CF1O810B
111
2
3
2
3
CF1O812B
Loosen two bolts, pull out the drain
plug mounting plate and unscrew the
oil ller plug to drain oil easier.
When the engine is warm, engine oil
is drained faster due to its uidity.
CF100(DSF75GT)_콤바인_영문판_08.indd 48 2017-07-03 오후 2:37:31