Daedong DSF75GT - Reaping operation steps

7
-
7
HARVESTDS
F75GT
7
-
6
7
-
7
HARVESTDS
F75GT
7
-
6
6. If the height difference between
the field and bank is small and
there is an entrance to the field,
prepare for reaping operation,
place the range shift lever in the
Standard position and drive slowly
onto the eld.
REAPING OPERATION STEPS
5. Set the range shift lever in the Low
speed, Standard or Driving posi-
tion.
A
A
B
B
C
C
D
D
E
cf1O705B
(1) Range Shift Lever
(A) Standard (B) Neutral
(C) Driving (D) Neutral (E) Low Speed
111
cf1O750a
Do not stop on straw debris or
dry weeds. Otherwise, it can
catch a re.
Stop the engine if any abnor-
mal condition is found.
Drive at a low speed to ensure
safety in a small eld or at the
corner of a eld.
Keep the headlamps or work
lamps illuminated when work-
ing at night or in a dark condi-
tion.
When working with others, op-
erate the horn as a signal.
•
•
•
•
•
WARNING
CF100(DSF75GT)_콤바인_영문판_07.indd 6 2017-07-03 오후 2:33:28