CF1O885A
(1) Reaping Cylinder Support Section
CF1O885A
(1) Parking Brake Cable
APPLY GREASE
ROUTINE MAINTENANCE AND ADJUSTMENT
(1) Cover (2) Element
(3) Secondary Element
(4) Outlet Valve
Before daily operation, remove any
dust by blowing air from the inside of
the element or tapping it lightly.
The compressed air pressure must
be below 7 kg/cm².
When carbon or oil is on the element,
use an element detergent to remove it.
Stop the engine before adjust-
ment and inspection.
When checking the oil and
coolant levels, lubricating
each part and checking the
battery, stop the engine in ad-
vance.
I
f the reaping unit is lifted for
an extended period of time, it
may fall by its weight.
•
•
•
IMPORTANT
CLEANING AIR CLEANER
ELEMENT
To Next Page
Loading...
