(1) Crops (A) Reaping Direction
TURNING
If wet or unripe crops need to be
reaped, reap them at a slower speed
than usual. Also, check the con-
cave and feeding unit regularly and
remove any accumulated crops or
blockage immediately.
WORKING IN SEVERE CONDI-
TIONS
cf1O753a
3. Reap the eld in the counterclock-
wise direction.
When reaping crops in a large
field, split the field for efficient
operation as shown in the gure.
•
NOTE
Prepare for reaping operation, place
the range shift lever in the Standard
position and drive slowly onto the
eld.
Do not slow down the engine
speed. If lowering the engine
speed, separation efficiency
can be degraded or the unit
can be clogged.
•
IMPORTANT
Raising the reaping unit before
reaping operation is completed
can leave some spots unreaped.
If the engine speed needs to be
lowered abruptly, lower it before
turning.
•
•
NOTE
To Next Page
Loading...
