Daedong DSF75GT - Harvest

7
HARVEST
7
CROP AND FIELD CONDITION FOR
COMBINE HARVESTER ...................7-2
CROP CONDITION ......................................7-2
FIELD CONDITIONS ....................................7-3
PREPARATION BEFORE WORK
WITH COMBINE HARVESTER ........7-3
REAPING CROPS ON FIELD EDGES.........7-3
PREPARATION OF EACH PART BE-
F
ORE WORK ............................................7-4
CAUTIONS DURING WORK ........................7-4
REAPING OPERATION SEQUENCE ..7-5
REAPING OPERATION STEPS ...................7-6
REAPING AND TURNING METHOD IN
THE FIELD ................................................7-8
T
URNING ...................................................7-10
P
OSITIONING AND ADJUSTING THE
DIVIDER .................................................. 7-11
A
DJUSTING THE REAPING SPEED ......... 7-12
W
ORKING IN A WET FIELD ......................7-14
T
URNING IN FIELD ....................................7-21
R
EAPING METHOD ...................................7-22
CAUTIONS DURING REAPING OPERA-
TION ........................................................7-23
T
HRESHING CROPS REAPED ON
FIELD EDGES.........................................7-23
D
ISCHARGING GRAINS ............................7-24
R
EEL TINE ANGLE ADJUSTMENT ...........7-28
A
DJUSTING REEL ROTATING SPEED ..... 7-29
THRESHING UNIT .............................7-30
ADJUSTING REEL POSITION ................... 7-31
ADJUSTING VERTICAL POSITION OF
FEEDING DRUM .....................................7-34
A
DJUSTING SIEVE CASE CHAFF ............7-36
A
DJUSTING THE SIEVE CASE AUXIL-
IAR
Y PLATE POSITION AND REPLAC-
ING THE NET .......................................... 7-36
A
DJUSTING DUST DISCHARGE CON-
TROL PLATE ...........................................7-39
GRAIN TANK .....................................7-40
ADJUSTING DISCHARGE CONTROL
PLATE .....................................................7-40
CF100(DSF75GT)_콤바인_영문판_07.indd 1 2017-07-03 오후 2:33:24