Reap crops on the edges of the eld
to obtain areas for turning and reap
crops in the center to divide the eld.
Then, reap the remainder with the
same method for reaping field with
sides different in length
WIDE FIELD
B55O738a
Do not decrease the engine
speed during turning. Low
engine speed can create poor
separation quality and blockage.
•
CAUTION
CAUTIONS DURING REAPING
OPERATION
(1) Grain Lamp
When working in a watery eld, emp-
ty the grain tank after every turn.
If the tank is full with grains, the
"Grain" lamp on the instrument
cluster blinks and the buzzer
sounds at short intervals. If this
happens, stop reaping immedi-
ately and empty the grain tank
If keeping reaping with this warn-
ing, the grain tank overows with
grains or is blocked by grains,
resulting in its malfunction.
•
•
•
CAUTION
cf1O744a
THRESHING CROPS REAPED ON
FIELD EDGES
(1) Main Shift Lever (2) Range Shift Lever
(3) Reaping Clutch Lever / Threshing Clutch Lever
(A) Engage
1. Move the main shift lever to the
"Neutral" position.
2. Move the range shift lever to the
"Neutral" position.
3. After lifting the reaping unit slightly,
set the reel to the highest position.
4. Start the engine, set the reaping/
threshing clutch levers in the En-
gage position, and set the engine
speed at 2,500 RPM.
To Next Page
Loading...