FOLDING THE CANOPY
1. Set the canopy in the lower posi-
tion.
2. Pull the pole to adjust the canopy
angle as desired.
(1) Canopy (2) Pole
(A) Pull (B) Lower
cf1O423A
The canopy pole can be ad-
justed between two positions
(work and store) and the roof
cover can be adjusted between
three positions (upper, mid and
lower).
• Set the canopy pole in the
Wo
rk position. (It can be set
in the Work position by per-
forming its folding procedure
in the reverse order.)
• Loosen the left and right
screws from the canopy pole
and canopy. Have another
person support the cover so
that it is not dropped onto the
ground.
•
After adjusting the canopy
angle, tighten both screws
rmly to x the cover.
IMPORTANT
To Next Page
Loading...
