Avoid operating the clutch pedal on
ramps.
When loading or unloading the com-
bine harvester on the transporting
vehicle, pay attention to the four di-
rections, horizontality and safety of
the combine harvester and stay on a
low speed lane.
The combine harvester can slip off
the ramps even if the brake pedal is
depressed.
Do not turn the combine harvester
on ramps.
Do not operate the power steering
lever, range shift lever, brake pedal,
clutch pedal or turning shift lever on
ramps.
If it is needed to turn the combine
harvester, turn it only on the ground
or deck, not on ramps.
The combine harvester may be
abruptly turned or driven off and slip
off the ramps.
CF1O044a CF1O045a
On the deck, lower the reaping unit onto
the deck and apply the parking brake.
Operate the automatic horizontal bal-
ance control system only when the ve-
hicle body is fully lowered.
Move the range shift lever to the low
speed position.
Secure the combine harvester by tying
it with ropes and engaging the ropes to
four hooks.
Make sure that the combine harvester
is secured on the deck.
Otherwise, the combine harvester may
move during transportation and an se-
vere injury or damage can occur.
CF1O046a
To Next Page
Loading...
