DAELIM DAYSTAR Service Manual

18-5
Electric Starter
Starter Magnetic Switch
Inspection
Turn the main ignition switch “ON”.
There should be phonic signal in battery
voltage while the starter magnetic switch is
depressed.
Tighten the two mounting bolts securely.
Install the starter motor cable, tighten the
terminal nuts securely.
Installation
Install a new o-ring into the front cover. Coat
the o-ring with oil and install the starter motor
into the crank case.
Align the rear cover with the case mark and
install the 2 setting bolts.
Tighten the setting bolts exactly.
O-Ring
O-Ring
O-Ring
O-Ring
O-Ring
O-RingO-Ring
O-Ring
O-Ring
O-Ring
O-Ring
O-Ring
O-Ring
Bolt
Bolt
Bolt
Bolt
Bolt
BoltBolt
Bolt
Bolt
Bolt
Bolt
Bolt
Bolt
Starter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic SwitchStarter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic Switch
Starter Magnetic Switch
Rear Cover
Rear Cover
Rear Cover
Rear Cover
Rear Cover
Rear CoverRear Cover
Rear Cover
Rear Cover
Rear Cover
Rear Cover
Rear Cover
Rear Cover
Mark
Mark
Mark
Mark
Mark
MarkMark
Mark
Mark
Mark
Mark
Mark
Mark

DAELIM DAYSTAR Specifications

General

Fuel System	Carburetor
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Engine Type	4-Stroke, Air-cooled
Displacement	124 cc
Transmission	5-speed
Fuel Capacity	12.5 liters
Weight	125 kg
Rear Suspension	Dual shock absorbers