DAELIM DAYSTAR - Page 76

7-7
A.C Generator / Starter Clutch
● Connect the AC generator wire and gear
position light switch wire coupler, and install
the wire clamp.
● Install the L. Lower cover and gear change
pedal bolt.
● Tighten the gear change pedal bolt.
Starter Clutch
● Remove the flywheel(⇨ 7-4)
● If the starter driven gear turns to the right when
pressing the flywheel as shown, it is in good
condition.
Disassembly
● Remove the three socket bolts, and remove the
one way clutch from the flywheel.
Gear Change Pedal
Gear Change Pedal
Gear Change Pedal
Gear Change Pedal
Gear Change Pedal
Gear Change PedalGear Change Pedal
Gear Change Pedal
Gear Change Pedal
Gear Change Pedal
Gear Change Pedal
Gear Change Pedal
Gear Change Pedal