Chapter 10 Other Functions
BECS-A88/C88 computerized embroidery machine owner’s manual 139
When the factory password and embroidery factory administrator password
were not established, then do initialize all of general embroidery parameters to the
default value that was saved by system.
When that factory password has already established and has already decrypt,
and then do initialize all of general embroidery parameters to the default value that
was saved by system.
The factory password has already established and hasn’t decrypt, embroidery
factory administrator password has already established and has already decrypt,
then the machine parameter was managed by factory recover to parameter value
was saved by factory, the other parameters were initialized to default value that
saved by system.
The factory password has already established and hasn’t decrypt, embroidery
factory administrator password has already established and hasn’t decrypt, then
the machine parameter was managed by factory recover to parameter value was
saved by factory, the machine applications parameter was managed by
administrator recover to parameter value that saved by administrator, the other
parameters were initialized to default value that saved by system.
The factory password hasn’t establish, embroidery factory administrator
password has already established and has decrypt, and then do initialize all of
general embroidery parameters to the default value that was saved by system.
The factory password hasn’t establish, embroidery factory administrator
password has already established and hasn’t decrypt, then the machine
To Next Page
Loading...
