Chapter 12 Directions on Coiling, Taping and Zigzag Embroidery
160 BECS-A88/C88 computerized embroidery machine owner’s manual
normal（lock-stitch）； right coiling； left
coiling；
taping 1； taping 2；
Z1 embroidery，Its feature is that the lever swings once every two
stitches.
Z2 embroidery，Its feature is that one lever swing every stitch and
one lever every two stitches take place alternately.
Z3 embroidery，Its feature is one lever swing every stitch.
Z4 embroidery，Its feature is one lever swing every stitch and its lever
swing direction is opposite to the one of Z3.
Z5 embroidery，Its feature is the same as Z4 and it’s desirable for the
embroidering of thick cords. (Refer to the parameter: the swinging scope of the
embroidery frame in Zigzag sewing)
Z6 embroidery，Its feature is three stitches at the same point and one
lever swing every stitch.
2. Automatic Shift
Before embroidering, automatic shift can be achieved through setting the color
changing position.
To Next Page
