Chapter 6 Memory Design Management
80 BECS-A88/C88 computerized embroidery machine owner’s manual
the manual frame-moving button. Then click and to return to the stop
point. At last pull the bar for embroidery.
Automatic moving frame out has two ways: moving frame to the offset point and
setting the moving distance. The operation is as follows: First set patching
embroidery function for the design. Then when embroidering to the patching
point, the machine moves to the offset point (which has to be set) or move out
according to the set distance. After patching pull the bar and the machine will
automatically return to the stop point to continue embroidery.
The following is how to add patching embroidery to the design:
Click in the main menu to enter the memory design management
screen.
Select the design in the memory design image area of the memory design
management screen.
Click “More Functions” to enter the design operation choosing screen.
Click “Add Patch Code to Design” to enter into “patching setting operation”
screen.
To Next Page
Loading...
