Daikin DCM601A52 - Page 49

User’s Manual EM11A015B
intelligent Touch Manager
48
(5) Fan Speed
Sets up the fan speed.
(Low) (Middle) (High)
(Automatic)
(6) Airow Direction
Sets up the fan direction.
< Airflow direction 0 > < Airflow direction 1 > < Airflow direction 2 > < Airflow direction 3 > < Airflow direction 4 > <Swing>
(7) Timer Extension Settings
Enables or disables the Timer Extension function.
(8) Setpoint Restriction
Use this setting to limit the setpoint range that can be achieved.
Cooling Limit: Sets up the setpoint range for the indoor unit in cooling mode. Enable or disable,
and enter the maximum and minimum temperatures.
Heating Limit: Sets up the setpoint range for the indoor unit in heating mode. Enable or disable,
and enter the maximum and minimum temperatures.
The Setpoint Restriction does not apply to the following items;
AHU, Hydrobox: leaving water setpoint and storage setpoint, Inv.Chiller: leaving water
setpoint, and Chiller: leaving water setpoint.
NOTE