EasyManuals Logo

Dalsa Linea Lite GigE Series User Manual

Dalsa Linea Lite GigE Series
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
102 • Operational Reference Linea Lite GigE Series Camera
Metadata
Selector
ChunkSelector Selects the specific metadata to control, when enabled.
Expert
OffsetX
Add the Horizontal Offset X
value used during the image acquisition to
the metadata attached to the image.
OffsetY
Add the Offset Y value used during the image acquisition to the
metadata attached to the image. Not available for Linea Lite.
Width
Add the Width
value used during the image acquisition to the
metadata attached to the image.
Height
Add the Height
value used during the image acquisition to the
metadata attached to the image.
PixelFormat Add the Pixel Format value used during the image acquisition to the
metadata attached to the image.
ExposureTime Add the Exposure Time value used during the image acquisition to the
metadata attached to the image.
cyclingPresetCurrentActiveSet
Add the Cycling Preset Current Active Set value used during the image
acquisition to the metadata attached to the image. Not available for
Line Lite.
Timestamp
Copies the Timestamp Value
at the start of exposure to the metadata
attached to the image.
LineStatusAll
Copies the Line Status All
value at the start of exposure to the
metadata attached to the image.
Gain
Add the Gain
feature value used during the image acquisition to the
metadata attached to the image.
Counter1ValueAtReset Copies the value of the Counter Value At Reset feature at the start of
Frame Readout, to the Metadata attached to the image. Supported
only in GenAPI compatibility mode.
DeviceID Add the Device ID value to the metadata attached to the image.
DeviceUserID Add the Device User ID value to the metadata attached to the image.
TestImageSelector Add the Test Image Selector value used during the image acquisition
to the metadata attached to the image.
BinningVertical
Add the Binning Vertical
value used during the image acquisition to
the metadata attached to the image.
BinningHorizontal
Add the Binning Horizontal
value used during the image acquisition to
the metadata attached to the image.
ExposureDelay
Add the Exposure Delay
value used during the image acquisition to
the metadata attached to the image. Supported only in GenAPI
compatibility mode.
Metadata Enable ChunkEnable Sets the enable state of the selected metadata. When enabled, the
metadata is included in the payload of the image.
.Expert
False Selected metadata disabled
True Selected metadata enabled.
Chunk Binning
Horizontal
ChunkBinningHorizontal Number of horizontal pixels to combine in the payload image.
Guru
Chunk Binning
Vertical
ChunkBinningVertical Number of vertical pixels to combine in the payload image.
Guru

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dalsa Linea Lite GigE Series and is the answer not in the manual?

Dalsa Linea Lite GigE Series Specifications

General IconGeneral
BrandDalsa
ModelLinea Lite GigE Series
CategoryDigital Camera
LanguageEnglish

Related product manuals