ECHO Series Ultrasonic Thickness Gages
73
Once you have created a file, you may open the file, edit information, or delete the file
from the datalogger. After you find the file name (e.g., “ECH09” as shown below), press
the F4 – Next key.
Find the file you would like to review.
Note, the F keys now display different options.
Use the arrow keys to select any letter or symbol on the screen to create a description.
Press the F4 – Next key when you are done.
Use the arrow keys to select any letter or symbol on the screen to create an Inspector ID.
Press the F4 – Next key when you are done.
To Next Page
Loading...