Product Reference Guide 121
Interleaved 2 of 5 Length 1, Length 2 Programming Instructions
See Length 1, Length 2 Programming Instructions on page 158 for detailed
instructions on setting this feature.
Codabar
The following options apply to the Codabar symbology.
Disable/Enable Codabar
When this feature is disabled, the scanner will not read Codabar bar codes.
NOTE
For Interleaved 2 of 5 bar codes,
lengths must be an even number.
Additionally, all check and data charac-
ters are included in the length calcula-
tions.
START / END
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 06
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 50
START / END
PROGRAMMING bar codes
Disable Codabar
DEFAULT
Enable Codabar
To Next Page
Loading...
