Datalogic Magellan 3300HSi User Manual

30 Magellan™ 3300HSI
Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep and/or
flash its green LED) upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate after transmit
• Good Read = Indicate after CTS
goes inactive, then activ
NOTE
This option (Indicate after CTS goes inactive, then
ac
tive), which uses CTS, is only valid for RS-232
interfaces.
e
START / END
PROGRAMMING bar codes
After Decode
DEFAULT
After Transmit
After CTS goes inactive, then active
³

Datalogic Magellan 3300HSi Specifications

General

Scanner type	1D
Decoding standards	GS1, MicroPDF417, PDF417
Optical sensor resolution	1280 pixels
Light levels (direct sunlight)	0 - 86100 lx
Dimensions (WxDxH)	152 x 87 x 152 mm
Power consumption (active)	9.9 W
Standard interfaces	USB, RS-232
Input voltage	90 - 264 V
Power requirements	47 - 63 Hz
Power consumption (standby)	2 W
Certification	RoHS, EN 60825-1, IEC 60825, IEC 60825-1
Product color	Stainless steel
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	790 g