Datalogic Magellan 3300HSi User Manual

Product Reference Guide 31
Good Read Beep Control
This feature enables/disables the scanner’s ability to beep upon a successful
decode of a bar code.
Good Read Beep Frequency
Adjusts the good read beep to sound at a selectable low, medium or high fre-
quency, selectable from the list below. (Controls the beeper’s pitch/tone.)
START / END
PROGRAMMING bar codes
Disable
Enable
DEFAULT
START / END
PROGRAMMING bar codes
Low
Medium
DEFAULT
High

Datalogic Magellan 3300HSi Specifications

General

Scanner type	1D
Decoding standards	GS1, MicroPDF417, PDF417
Optical sensor resolution	1280 pixels
Light levels (direct sunlight)	0 - 86100 lx
Dimensions (WxDxH)	152 x 87 x 152 mm
Power consumption (active)	9.9 W
Standard interfaces	USB, RS-232
Input voltage	90 - 264 V
Power requirements	47 - 63 Hz
Power consumption (standby)	2 W
Certification	RoHS, EN 60825-1, IEC 60825, IEC 60825-1
Product color	Stainless steel
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	790 g