Product Reference Guide 53
RS-232 Interface Features (continued)
Host Echo Quiet Interval
This setting specifies the time interval of RS-232 channel inactivity which must
transpire before the scanner will break the host echo loop to transmit the bar
code data that has just been scanned to the host.
START / END
PROGRAMMING bar codes
Host Echo Quiet Interval = 0msec
Host Echo Quiet Interval = 10msec
DEFAULT
Host Echo Quiet Interval = 20msec
Host Echo Quiet Interval = 30msec
Host Echo Quiet Interval = 40msec
Host Echo Quiet Interval = 50msec
Host Echo Quiet Interval = 60msec
Host Echo Quiet Interval = 70msec
To Next Page
Loading...
