Datalogic Magellan 3300HSi User Manual

Product Reference Guide 191
Autorun File Processing
After insertion of the card, the scanner will mount the microSD card and search
for the file “AUTORUN.DLS”. Embedded in that file is a validation pattern of the
ASCII strings “$START$” and “$END$” located at the respective starting and
ending of the file.
If the validation pattern is found, the file may contain any of the following com-
mands. The scanner will parse the file taking action according to these com-
mands. Filenames in italics specify a user-defined name.
Example AUTORUN.DLS file:
$START$ (required)
CONFIG,
FILENAME.TEX
DUMPSTATS, FILENAME.TXT
DUMPCFG, FILENAME.TEX
LOADSW, FILENAME.BIN
$END$ (required)
microSD Function Summary
The following table summarizes various functions of microSD card.
* Contact tech support for any available feature upgrade license.
FUNCTION
Image
Capture
Export
Status
Export
Configuration
Load
Applic
Load
Config
Load
CPLD
Code
Feature
Upgrade*
Direction
Scanner 
microSD Card
 
microSD Card 
Scanner

Initiated by
Scanning a label

AUTORUN.DLS file
in microSD card


Datalogic Magellan 3300HSi Specifications

General

Scanner type	1D
Decoding standards	GS1, MicroPDF417, PDF417
Optical sensor resolution	1280 pixels
Light levels (direct sunlight)	0 - 86100 lx
Dimensions (WxDxH)	152 x 87 x 152 mm
Power consumption (active)	9.9 W
Standard interfaces	USB, RS-232
Input voltage	90 - 264 V
Power requirements	47 - 63 Hz
Power consumption (standby)	2 W
Certification	RoHS, EN 60825-1, IEC 60825, IEC 60825-1
Product color	Stainless steel
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	790 g