Datalogic Magellan 3300HSi User Manual

198 Magellan™ 3300HSi
EAN-8 with 5-Digit Supplemental
• Check digit must be included in label data and is assumed to be correct.
• Prefix must be an ASCII characters 'FF' - total length including prefix must
be 15.
• Example: 'FF0021012612345'.
EAN-8 with Code 128 Supplemental
• Check digit must be included in label data and is assumed to be correct.
• Supplemental data is appended to base label.
• Prefix must be an ASCII characters 'FF' - total length including prefix must
be greater than 16 (code 128 Supplemental codes are variable length hav
-
ing a minimum of 2 data characters).
• Characters immediately following base label must be of the form '8100',
'8101' or '8102'.
• Example: 'FF002101268102000951'.
EAN-13
• Check digit must be included in label data and is assumed to be correct
• Prefix must be an ASCII character 'F'- total length including prefix must be
14
• Example: 'F1101234567891'
EAN-13 with 2-Digit Supplemental
• Check digit must be included in label data and is assumed to be correct
• Supplemental data is appended to base label
• Prefix must be an ASCII character 'F'- total length including prefix must be
16
• Example: 'F110123456789112'
EAN-13 with 5-Digit Supplemental
• Check digit must be included in label data and is assumed to be correct.
• Prefix must be an ASCII character 'F'- total length including prefix must be
19.
• Example: 'F110123456789112345'.
EAN-13 with Code 128 Supplemental
• Check digit must be included in label data and is assumed to be correct
• Supplemental data is appended to base label
• Prefix must be an ASCII character 'F'- total length including prefix must be
greater or equal to 20 (code 128 Supplemental codes are variable length
having a minimum of 2 data characters)
• Characters immediately following base label must be of the form '8100',
'8101' or '8102'
• Example: 'F11012345678918100000951'

Datalogic Magellan 3300HSi Specifications

General

Scanner type	1D
Decoding standards	GS1, MicroPDF417, PDF417
Optical sensor resolution	1280 pixels
Light levels (direct sunlight)	0 - 86100 lx
Dimensions (WxDxH)	152 x 87 x 152 mm
Power consumption (active)	9.9 W
Standard interfaces	USB, RS-232
Input voltage	90 - 264 V
Power requirements	47 - 63 Hz
Power consumption (standby)	2 W
Certification	RoHS, EN 60825-1, IEC 60825, IEC 60825-1
Product color	Stainless steel
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	790 g