40 Magellan™ 3300HSI
Image Brightness
This feature sets the image brightness value. Follow these instructions to con-
figure this feature:
1. Scan the START bar code.
2. Scan the Set Image Brightness bar code.
3. Turn to Appendix C, and scan the two digits (zero-padded) representing
the desired brightness in decimal notation. The configurable range is 01-
0x0A by increments of 01.
4. Scan the END bar code.
Image Contrast
This feature sets the image contrast value. Follow these instructions to config-
ure this feature:
1. Scan the START bar code.
2. Scan the Set Image Contrast bar code.
3. Turn to Appendix C, and scan the two digits (zero-padded) representing
the desired contrast in decimal notation. The configurable range is 01-
0x0A by increments of 01.
4. Scan the END bar code.
START / END
PROGRAMMING bar codes
Set Image Brightness
DEFAULT SETTING FOR THIS FEATURE: 09
START / END
PROGRAMMING bar codes
Set Image Contrast
DEFAULT SETTING FOR THIS FEATURE: 09