Datalogic Magellan 3300HSi

Product Reference Guide 35
Image Capture
Image Capture
How to Capture an Image
There are two methods of capturing images as discussed below:
• "Image Capture to a microSD Card
by Scanning a Special Label"
• "Image Capture to the Ho
st by Host Command"
• "Image Capture to a microSD Card
by Optional Remote Camera Button
Press"
Image Capture to a microSD Card by Scanning a Special Label
Insert a microSD card into the scanner, scan a capture label and place the item
to be captured in front of the scanner. If an optional Remote Camera Button is
connected to the auxiliary port, then press the Remote Camera Button to write
an image to the microSD card. If no Remote Camera Button is connected, the
image will be written to the microSD card five seconds after scanning the cap-
ture label.
The format, size, contrast, brightness and compression use the configured val-
ues.
This Capture label is as follows:
<FNC3>IMAGEFAUTO<CR>
NOTE
The Capture label will not read unless a microSD card is inserted.
The image filename is automatically increased from image000 to image999.
The date image file generated is not actual, since no real time clock is embed-
ded in the scanner.