50 Magellan™ 3300HSI
RS-232 Interface Features (continued)
Intercharacter Delay
This delay is inserted after each data character transmitted. If the transmission
speed is too high, the system may not be able to receive all characters. You may
need to adjust the delay to make the system work properly.
START / END
PROGRAMMING bar codes
Inter-Char Delay = No Delay
DEFAULT
Interchar Delay = 10 msec
Interchar Delay = 20 msec
Interchar Delay = 30 msec
Interchar Delay = 40 msec
Interchar Delay = 50 msec
Interchar Delay = 60 msec
Interchar Delay = 70 msec