Datalogic Magellan 3300HSi User Manual

Product Reference Guide 193
Export a Configuration file from the Scanner to the microSD card
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTO-
RUN.DLS.
$START$
DUMPCFG,SDCONFIG.TEX (Fi
lename can be anything, for example “SOME-
THING.TEX”)
$END$
2. Save or copy file AUTORUN.DLS to microSD card
3. Insert the microSD card to scanner
4. Wait for 3 seconds,
A scanner configuration file named SDCONFIG.TXT is saved to the microSD
ca
rd.
Export Scanner Status to microSD card
The data includes scanner ID, statistics and scanner health.
By scanning a label
1. Insert the microSD card into the scanner
2. Scan the status export label
<FNC3>STATUS<CR>
3. Upon scanner audio indication of completion, the scanner status text file
na
med status.txt is saved to the microSD card.
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTORUN.DLS
$START$
DUMPS
TATS,DMPSTATS.TXT
$END$
2. Save or copy the AUTORUN.DLS file to the microSD card
3. Insert the microSD card into the scanner
4. Wait for about 3 seconds,
A scanner statistics file named DMPSTATS.TXT is saved to the microSD card.

Datalogic Magellan 3300HSi Specifications

General

Scanner type	1D
Decoding standards	GS1, MicroPDF417, PDF417
Optical sensor resolution	1280 pixels
Light levels (direct sunlight)	0 - 86100 lx
Dimensions (WxDxH)	152 x 87 x 152 mm
Power consumption (active)	9.9 W
Standard interfaces	USB, RS-232
Input voltage	90 - 264 V
Power requirements	47 - 63 Hz
Power consumption (standby)	2 W
Certification	RoHS, EN 60825-1, IEC 60825, IEC 60825-1
Product color	Stainless steel
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	790 g