Datalogic Magellan 3300HSi User Manual

Product Reference Guide 183
Appendix F
Host Commands
Accepting RS-232 Commands
The scanner responds to the following RS-232 commands:
If one of the above commands is received, the scanner will perform the steps
indicated for the command. Host commands for other interfaces are also avail-
able. Contact Tech Support for more details.
Also see the section "Image Capture to the Host by Host Command" on page 36
for details concerning that feature.
COMMAND ASCII HEX COMMENT
Enable Scan-
ner
E0x45
Disable 
Scanner
D0x44
Reset Scanner
R0x52
Not On File 
Indication
F 0x46 Long series of beeps
Beep Good
Read Tone
B 0x42 Beeps if Good Read Beep is enabled
Force Good
Read Tone
! 0x01 Beeps regardless of beep setting
Identification
request
i0x69
Returns long response
1
1. Call Tech Support for information.
Health
request
h0x68
Returns long response
1
Status
request
s0x73
Returns long response
1

Datalogic Magellan 3300HSi Specifications

General

Scanner type	1D
Decoding standards	GS1, MicroPDF417, PDF417
Optical sensor resolution	1280 pixels
Light levels (direct sunlight)	0 - 86100 lx
Dimensions (WxDxH)	152 x 87 x 152 mm
Power consumption (active)	9.9 W
Standard interfaces	USB, RS-232
Input voltage	90 - 264 V
Power requirements	47 - 63 Hz
Power consumption (standby)	2 W
Certification	RoHS, EN 60825-1, IEC 60825, IEC 60825-1
Product color	Stainless steel
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Weight	790 g