Datalogic Magellan 3300HSi

192 Magellan™ 3300HSi
microSD Function Details
From Scanner to microSD Card
Capture and save an image to a microSD card by scanning a label.
1. Insert the microSD card into the scanner
2. Scan the Capture Label
The scanner enters image capture mode.
3. Place the item to be captured in front of the scanner.
Press the Remote Camera Button if the sca
nner has this optional accessory
connected. Otherwise, wait for 5 seconds and the scanner will automati-
cally capture and save the image to the microSD card.
4. Upon scanner audio indication of completion, an image is saved to the
microS
D card.
NOTE
The image file name range is from IMAGE000 to IMAGE999. if the
same name already exists in the microSD card, the scanner skips that
name and uses the next. For example, if IMAGE000.JPG is already used
in the microSD card, the scanner uses IMAGE001.JPG. The time stamp
is not real, since scanner does not have a real time clock.
Image format (.BMP, .JPG), image size (VGA, WVGA, Full size), Bright-
ness (0~9), contrast (0~9), and JPG compression ratio (0~100) are
defined in configuration.