Datalogic Magellan 3300HSi

140 Magellan™ 3300HSI
Datamatrix (continued)
Datamatrix Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to Appendix C, and scan the four digits (zero-padded) representing
the length.
NOTE
For Datamatrix bar codes, only the data characters are
included in the length calculations.
Any value set higher than 800 will be considered to be 800.
Scan the END bar code.
START / END
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 0800