RS20i Installation and Operating Guide Page C-3
Appendix C. Product Specifications
Document #: 9301H52900 Ver. 1.02
Individual Channel Delays
0 - 1000ms
Global Delay
0 –1000ms
Note: Total delay per channel not to exceed 1000ms
Automation Inputs/Outputs
16 bi-directional GPIO’s, optically isolated, DB25 connnector
4 programmable 12V output triggers, 3.5mm mono jack
External +5v@140mA
Management
Remote Control
RS232 DB9
10/100Mbps Ethernet
Can be controlled by smart phone, iPad, Android based devices via iRule or VNC
Crestron Integrated Device
Setup/Operation Profiles
Configurable for up to 20 user defined named input selections. Input selections include
processing options along with a selected named set for EQ and output presets.
Configurable for up 20 user defined named EQ sets which include definitions for Dirac
optimization, third octave EQ, parametric EQ, bass and treble controls.
Configurable for up to 20 user defined output presets which include output channel
names, output routing, crossover high/low pass filters.
User defined input selections controllable by Touchscreen, GPIO, or Ethernet
Export/Load of user configurations via USB
Power Requirements
105-130 VAC or 215-260 VAC, 50-60Hz. Input voltage range manually switched at the
rear panel by rotating the fuse holder.
94w power consumption
Hardware Dimensions
Imperial - 5.60”(H) x 17.40”(W) x 17.63”(D). Height with feet removed 5.25”.
Metric - 14.22 cm(H) x 44.20 cm(W) x 44.78 cm(D). Height with feet removed 13.34
cm.
Shipping Weight (with packaging and accessories) 36 lbs (16.33 kg)
RS20i unit weight 26.5lbs (12.02 kg)
3U 19” rackmount with optional ears
RS20i depth behind optional rack ears 16.86” (42.82 cm)
To Next Page
Loading...
