RS20iInstallationandOperatingGuide
Page 54
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.02
4.4.1 Edit EQ
The Edit EQs button on the Audio EQ Setup screen opens the Edit EQ screen to Copy, Create, Rename
or Delete an Audio EQ Setup.
Setup > EQs > Edit EQ
Figure 33. Edit EQ Screen
Functions on this screen are described in the table below.
Table 14. Edit EQ
Function Description
Copy EQ
Use an existing EQ setup as a template for a new one. Select the EQ you wish
to copy from by selecting it from the drop down box. Then, touch the To box to
bring up the virtual keyboard and enter a name for the new EQ. Press the
Copy button to complete the process, or press Cancel to quit.
Create EQ
Select an empty or clear EQ setup and use it as a template for a new one.
Press the Create button to complete the process, or press Cancel to quit.
Rename EQ
Give an existing EQ setup a new name. Select an existing EQ setup from the
drop-down list on the right side of the screen. Touch the To box to bring up the
virtual keyboard and enter a new name for the EQ setup. Press the Rename
button to complete the process, or press Cancel to quit.
Note: The EQ name is changed for all inputs that use the EQ.
Delete EQ
Select an existing EQ setup from the drop-down list on the right side of the
screen. Press the Delete button to complete the process, or press Cancel to
quit.
To Next Page
Loading...
