Operation
VMS cleaning
94897201.pdf2007-12-18
filter sock is three times a day. A new filter
sock should always be inserted after a
system cleaning.
Viewing the progress of a
cleaning process
During a VMS cleaning session, each
cleaning phase, for example, pre-rinse or
circulation cleaning is displayed in the After
treatment window. After starting a
cleaning/rinsing process from the touch
screen, view information about the cleaning
process by pressing the Close Cleaning and
Rinsing button.
Below is an example of a system cleaning.
Elapsed time of the
cleaning process
White
Ongoing cleaning type
and phase
Blue
Each cleaning phase is displayed at the top
of the window. When the cleaning session
starts, each phase changes colour
progressively from left to right. Blue means
that the cleaning phase has been
performed, white means ongoing cleaning
phase.
Ongoing cleaning phase is also displayed in
the middle right corner of the touch screen.
In this area it is also possible see the
cleaning type.
101(198)
To Next Page
Loading...
Need help?
General
