Maintenance
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
* The front of the condensing unit must be
cleaned frequently to avoid blocking of the
airflow. This must be done carefully with a
soft brush.
Never use solvents on any part of the
refrigeration equipment.
Maintenance schedule: a
summary
Activity Daily Weekly Every third
week
Monthly Bi-mont-
hly
YearlyActivity Daily Weekly Every third
week
Monthly Bi-mont-
hly
Yearly
Checklist:
1. Overall performance
2. VMS management software
3. Vacuum pump (DVP-F or VP 700)
4. Atlas Copco SF4 Full-feature
compressor
5. Hydraulic pump unit
6. Cleaning detergent
XChecklist:
1. Overall performance
2. VMS management software
3. Vacuum pump (DVP-F or VP 700)
4. Atlas Copco SF4 Full-feature
compressor
5. Hydraulic pump unit
6. Cleaning detergent
X
Cleaning of milking station XCleaning of milking station X
Change of filter sock XChange of filter sock X
Milk filter unit: cleaning interior parts XMilk filter unit: cleaning interior parts X
Cleaning of cow-detection sensors XCleaning of cow-detection sensors X
Check of teat preparation module XCheck of teat preparation module X
Check of hydraulic pump unit oil filter
indicator
XCheck of hydraulic pump unit oil filter
indicator
X
Check of air and oil filter, and lubrication
rate in ORS
XCheck of air and oil filter, and lubrication
rate in ORS
X
Change of liners XChange of liners X
Change of air and oil filter, and oil in ORS XChange of air and oil filter, and oil in ORS X
Change of flexible double-tubes XChange of flexible double-tubes X
Check of multi-purpose arm XCheck of multi-purpose arm X
Check of compressor XCheck of compressor X
Vacuum pump (DVP-F) XVacuum pump (DVP-F) X
Removing hair from udders XRemoving hair from udders X
Lubrication of hinges on the gates XLubrication of hinges on the gates X
134(198)
To Next Page
Loading...
Need help?
General
