Operation
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
4. If desired, take a milk sample via the
manhole at the top of the tank.
5. Remove the grey cap from the tank outlet.
6. Connect the hose of the dairy truck to the
tank outlet.
Pick-up valve button
7. To start the tank emptying, open the
pick-up valve by pressing the pick-up valve
button in the lower right corner of the
operating panel. (Pressing twice on the
button closes the valve.)
8. When the tank is empty, disconnect the
hose from the tank outlet.
9. Fit the black cap on the tank outlet.
Start/stop cleaning button
10. Press the start/stop cleaning button to
start the tank cleaning.
Tank emptying: storage tanks from
other manufacturers
If in doubt on how to operate the tank, see
its manual for further instructions.
77(198)
To Next Page
Loading...
